Featured Goodies

It's Bean the Cat! (short for Jelly Bean)
A super soft, squish-able, lovable round-headed black cat with a yellow hood.

- This plush measures 6" tall, 5" wide, and 3" deep.
- Made with 100% Minky fabric (soft polyester) and Polyfil plush.
- Removable yellow hood reveals his large forehead.
- Includes metal clasp chain that attaches to a loop connected to Bean's head.

As the cozy tent glowed softly, Bean the Cat curled up with a tiny mug of hot cocoa in his tiny hands, his ears twitching in delight as he savored each warm sip beneath the shimmering starlit sky.

Camping with Bean Night Light is made with double-side printed acrylic panels that you can connect together without the need for glue or tape!

>INSTRUCTIONS<

Fully built, the nightlight is 6"x 5"x 4.5" inches.

Includes double-side printed acrylic pieces, adhesive LED light strip with USB plug & on/off switch, and instructions.

USB Wall Adapter plug not included!

4.3"x4"
Weatherproof and waterproof vinyl decal sticker
Used for outdoor or indoor purposes

How to use

1. Clean surface of any dirt or dust.
2. Remove the paper backing by peeling away the transfer tape. The transfer tape will hold the individual pieces of the sticker in place while you position it onto the surface.
3. Apply transfer tape onto your surface to adhere it.
4. Use a credit card or squeegee to apply pressure to the entire design to make sure its fully adhered and to remove any air bubbles.
5. Slowly peel the transfer tape away at a 180 degree angle to leave the sticker adhered.
6. **Do not peel too quickly as the sticker may stay stuck onto the transfer tape if not careful.

5"x4"
Weatherproof and waterproof vinyl decal sticker
Used for outdoor or indoor purposes

How to use

1. Clean surface of any dirt or dust.
2. Remove the paper backing by peeling away the transfer tape. The transfer tape will hold the individual pieces of the sticker in place while you position it onto the surface.
3. Apply transfer tape onto your surface to adhere it.
4. Use a credit card or squeegee to apply pressure to the entire design to make sure its fully adhered and to remove any air bubbles.
5. Slowly peel the transfer tape away at a 180 degree angle to leave the sticker adhered.
6. **Do not peel too quickly as the sticker may stay stuck onto the transfer tape if not careful.

4.85"x4"
Weatherproof and waterproof vinyl decal sticker
Used for outdoor or indoor purposes

How to use

1. Clean surface of any dirt or dust.
2. Remove the paper backing by peeling away the transfer tape. The transfer tape will hold the individual pieces of the sticker in place while you position it onto the surface.
3. Apply transfer tape onto your surface to adhere it.
4. Use a credit card or squeegee to apply pressure to the entire design to make sure its fully adhered and to remove any air bubbles.
5. Slowly peel the transfer tape away at a 180 degree angle to leave the sticker adhered.
6. **Do not peel too quickly as the sticker may stay stuck onto the transfer tape if not careful.

5.7"x3"
Weatherproof and waterproof vinyl decal sticker
Used for outdoor or indoor purposes

How to use

1. Clean surface of any dirt or dust.
2. Remove the paper backing by peeling away the transfer tape. The transfer tape will hold the individual pieces of the sticker in place while you position it onto the surface.
3. Apply transfer tape onto your surface to adhere it.
4. Use a credit card or squeegee to apply pressure to the entire design to make sure its fully adhered and to remove any air bubbles.
5. Slowly peel the transfer tape away at a 180 degree angle to leave the sticker adhered.
6. **Do not peel too quickly as the sticker may stay stuck onto the transfer tape if not careful.

4"x5.2"
Weatherproof and waterproof vinyl decal sticker
Used for outdoor or indoor purposes

How to use

1. Clean surface of any dirt or dust.
2. Remove the paper backing by peeling away the transfer tape. The transfer tape will hold the individual pieces of the sticker in place while you position it onto the surface.
3. Apply transfer tape onto your surface to adhere it.
4. Use a credit card or squeegee to apply pressure to the entire design to make sure its fully adhered and to remove any air bubbles.
5. Slowly peel the transfer tape away at a 180 degree angle to leave the sticker adhered.
6. **Do not peel too quickly as the sticker may stay stuck onto the transfer tape if not careful.

4"x4"
Weatherproof and waterproof vinyl decal sticker
Used for outdoor or indoor purposes

How to use

1. Clean surface of any dirt or dust.
2. Remove the paper backing by peeling away the transfer tape. The transfer tape will hold the individual pieces of the sticker in place while you position it onto the surface.
3. Apply transfer tape onto your surface to adhere it.
4. Use a credit card or squeegee to apply pressure to the entire design to make sure its fully adhered and to remove any air bubbles.
5. Slowly peel the transfer tape away at a 180 degree angle to leave the sticker adhered.
6. **Do not peel too quickly as the sticker may stay stuck onto the transfer tape if not careful.

3.8"x3.92"
Weatherproof and waterproof vinyl decal sticker
Used for outdoor or indoor purposes

How to use

1. Clean surface of any dirt or dust.
2. Remove the paper backing by peeling away the transfer tape. The transfer tape will hold the individual pieces of the sticker in place while you position it onto the surface.
3. Apply transfer tape onto your surface to adhere it.
4. Use a credit card or squeegee to apply pressure to the entire design to make sure its fully adhered and to remove any air bubbles.
5. Slowly peel the transfer tape away at a 180 degree angle to leave the sticker adhered.
6. **Do not peel too quickly as the sticker may stay stuck onto the transfer tape if not careful.

3.9"x5.9"
Weatherproof and waterproof vinyl decal sticker
Used for outdoor or indoor purposes

How to use

1. Clean surface of any dirt or dust.
2. Remove the paper backing by peeling away the transfer tape. The transfer tape will hold the individual pieces of the sticker in place while you position it onto the surface.
3. Apply transfer tape onto your surface to adhere it.
4. Use a credit card or squeegee to apply pressure to the entire design to make sure its fully adhered and to remove any air bubbles.
5. Slowly peel the transfer tape away at a 180 degree angle to leave the sticker adhered.
6. **Do not peel too quickly as the sticker may stay stuck onto the transfer tape if not careful.

3.8"x4.6"
Weatherproof and waterproof vinyl decal sticker
Used for outdoor or indoor purposes

How to use

1. Clean surface of any dirt or dust.
2. Remove the paper backing by peeling away the transfer tape. The transfer tape will hold the individual pieces of the sticker in place while you position it onto the surface.
3. Apply transfer tape onto your surface to adhere it.
4. Use a credit card or squeegee to apply pressure to the entire design to make sure its fully adhered and to remove any air bubbles.
5. Slowly peel the transfer tape away at a 180 degree angle to leave the sticker adhered.
6. **Do not peel too quickly as the sticker may stay stuck onto the transfer tape if not careful.

5.35"x4"
Weatherproof and waterproof vinyl decal sticker
Used for outdoor or indoor purposes

How to use

1. Clean surface of any dirt or dust.
2. Remove the paper backing by peeling away the transfer tape. The transfer tape will hold the individual pieces of the sticker in place while you position it onto the surface.
3. Apply transfer tape onto your surface to adhere it.
4. Use a credit card or squeegee to apply pressure to the entire design to make sure its fully adhered and to remove any air bubbles.
5. Slowly peel the transfer tape away at a 180 degree angle to leave the sticker adhered.
6. **Do not peel too quickly as the sticker may stay stuck onto the transfer tape if not careful.

5.5"x3.8"
Weatherproof and waterproof vinyl decal sticker
Used for outdoor or indoor purposes

How to use

1. Clean surface of any dirt or dust.
2. Remove the paper backing by peeling away the transfer tape. The transfer tape will hold the individual pieces of the sticker in place while you position it onto the surface.
3. Apply transfer tape onto your surface to adhere it.
4. Use a credit card or squeegee to apply pressure to the entire design to make sure its fully adhered and to remove any air bubbles.
5. Slowly peel the transfer tape away at a 180 degree angle to leave the sticker adhered.
6. **Do not peel too quickly as the sticker may stay stuck onto the transfer tape if not careful.

3.9"x5.5"
Weatherproof and waterproof vinyl decal sticker
Used for outdoor or indoor purposes

How to use

1. Clean surface of any dirt or dust.
2. Remove the paper backing by peeling away the transfer tape. The transfer tape will hold the individual pieces of the sticker in place while you position it onto the surface.
3. Apply transfer tape onto your surface to adhere it.
4. Use a credit card or squeegee to apply pressure to the entire design to make sure its fully adhered and to remove any air bubbles.
5. Slowly peel the transfer tape away at a 180 degree angle to leave the sticker adhered.
6. **Do not peel too quickly as the sticker may stay stuck onto the transfer tape if not careful.

3.8x5.7
Weatherproof and waterproof vinyl decal sticker
Used for outdoor or indoor purposes

How to use

1. Clean surface of any dirt or dust.
2. Remove the paper backing by peeling away the transfer tape. The transfer tape will hold the individual pieces of the sticker in place while you position it onto the surface.
3. Apply transfer tape onto your surface to adhere it.
4. Use a credit card or squeegee to apply pressure to the entire design to make sure its fully adhered and to remove any air bubbles.
5. Slowly peel the transfer tape away at a 180 degree angle to leave the sticker adhered.
6. **Do not peel too quickly as the sticker may stay stuck onto the transfer tape if not careful.

3.5x3.2
Weatherproof and waterproof vinyl decal sticker
Used for outdoor or indoor purposes

How to use

1. Clean surface of any dirt or dust.
2. Remove the paper backing by peeling away the transfer tape. The transfer tape will hold the individual pieces of the sticker in place while you position it onto the surface.
3. Apply transfer tape onto your surface to adhere it.
4. Use a credit card or squeegee to apply pressure to the entire design to make sure its fully adhered and to remove any air bubbles.
5. Slowly peel the transfer tape away at a 180 degree angle to leave the sticker adhered.
6. **Do not peel too quickly as the sticker may stay stuck onto the transfer tape if not careful.

How to use

1. Clean surface of any dirt or dust.
2. Remove the paper backing by peeling away the transfer tape. The transfer tape will hold the individual pieces of the sticker in place while you position it onto the surface.
3. Apply transfer tape onto your surface to adhere it.
4. Use a credit card or squeegee to apply pressure to the entire design to make sure its fully adhered and to remove any air bubbles.
5. Slowly peel the transfer tape away at a 180 degree angle to leave the sticker adhered.
6. **Do not peel too quickly as the sticker may stay stuck onto the transfer tape if not careful.

How to use

1. Clean surface of any dirt or dust.
2. Remove the paper backing by peeling away the transfer tape. The transfer tape will hold the individual pieces of the sticker in place while you position it onto the surface.
3. Apply transfer tape onto your surface to adhere it.
4. Use a credit card or squeegee to apply pressure to the entire design to make sure its fully adhered and to remove any air bubbles.
5. Slowly peel the transfer tape away at a 180 degree angle to leave the sticker adhered.
6. **Do not peel too quickly as the sticker may stay stuck onto the transfer tape if not careful.

How to use

1. Clean surface of any dirt or dust.
2. Remove the paper backing by peeling away the transfer tape. The transfer tape will hold the individual pieces of the sticker in place while you position it onto the surface.
3. Apply transfer tape onto your surface to adhere it.
4. Use a credit card or squeegee to apply pressure to the entire design to make sure its fully adhered and to remove any air bubbles.
5. Slowly peel the transfer tape away at a 180 degree angle to leave the sticker adhered.
6. **Do not peel too quickly as the sticker may stay stuck onto the transfer tape if not careful.