Produkte

Official hololive x Bandage Brigade collaboration.

4" x 6" Postcard
Matte coated front 
Uncoated back

OFFICIALLY LICENSED PRODUCT
Ⓒ COVER

Official hololive x Bandage Brigade collaboration.

Size: 3 x 2"
Glossy Vinyl Waterproof UV Resistant Sticker 

You can place them on laptops, water bottles, tablets, notebooks, phones, and more!

OFFICIALLY LICENSED PRODUCT
Ⓒ COVER

Official hololive x Bandage Brigade collaboration.

Cecilia Immergreen's Day Out Tee is screen printed with water based ink on a white 100% cotton t-shirt.

*Garment measured flat on surface. Sizes are standard U.S. unisex fit, please allow 1-2 cm size variance. 
Model Info:
Aria: 5'9" wearing size medium
Stephanie: 5'4" wearing size medium

Wash & Care

• Made of 4.3 oz., preshrunk 100% combed ring spun cotton
• Wash cold inside out.
• Hang to dry.

OFFICIALLY LICENSED PRODUCT
Ⓒ COVER

Official hololive x Bandage Brigade collaboration.

Fabric Banner
2ft x 6ft (24"x72")

Wash Care
100% Polyester
Wash cold and dry low temp
Iron according to iron's polyester/synthetic settings

OFFICIALLY LICENSED PRODUCT
Ⓒ COVER

Official hololive x Bandage Brigade collaboration.

Size: 6 x 3.36"
Weatherproof and waterproof vinyl decal sticker
Can be used for outdoor or indoor purposes

How to use

1. Clean surface of any dirt or dust.
2. Remove the paper backing by peeling away the transfer tape. The transfer tape will hold the individual pieces of the sticker in place while you position it onto the surface.
3. Apply transfer tape onto your surface to adhere it.
4. Use a credit card or squeegee to apply pressure to the entire design to make sure its fully adhered and to remove any air bubbles.
5. Slowly peel the transfer tape away at a 180 degree angle to leave the sticker adhered.
6. **Do not peel too quickly as the sticker may stay stuck onto the transfer tape if not careful.
   
   

OFFICIALLY LICENSED PRODUCT
Ⓒ COVER

Get your favorite design as a magnet!

It's like a sticker that you can use again and again.
This acrylic magnet can be stuck on your fridge, whiteboard, metal locker, or anywhere else you can show off a magnetic piece of artwork!

Size: 2.7 x 2.5"
Made with 1/8 inch, laser cut durable acrylic and magnetic backing.
Arrives with a peel-able protective plastic film on the front.

4.5 x 4 inches
Weatherproof and waterproof vinyl decal sticker
Used for outdoor or indoor purposes

How to use

1. Clean surface of any dirt or dust.
2. Remove the paper backing by peeling away the transfer tape. The transfer tape will hold the individual pieces of the sticker in place while you position it onto the surface.
3. Apply transfer tape onto your surface to adhere it.
4. Use a credit card or squeegee to apply pressure to the entire design to make sure its fully adhered and to remove any air bubbles.
5. Slowly peel the transfer tape away at a 180 degree angle to leave the sticker adhered.
6. **Do not peel too quickly as the sticker may stay stuck onto the transfer tape if not careful.

All bark and all bite!

2" Hard Enamel Pin
Black Nickel Plating
Black Rubber Backing

*black nickel plating is a reflective material, color varies depending on lighting and angle

Do worry, they bite :)

Size: 3"x 2.7" 
Vinyl Waterproof UV Resistant Sticker 

You can place them on laptops, water bottles, tablets, notebooks, phones, and more!

Get your favorite design as a magnet!

It's like a sticker that you can use again and again.
This acrylic magnet can be stuck on your fridge, whiteboard, metal locker, or anywhere else you can show off a magnetic piece of artwork!

Size: 2.1x2.5"
Made with 1/8 inch, laser cut durable acrylic and magnetic backing.
Arrives with a peel-able protective plastic film on the front.

Size: 2.1 x 2.5"
Glossy Vinyl Waterproof UV Resistant Sticker 

You can place them on laptops, water bottles, tablets, notebooks, phones, and more!
*Watermark will not be on the final product

Bean with his freshly brewed hot cooca. Would you like some too?

Size: 2"x 3" 
Vinyl Waterproof UV Resistant Sticker 

You can place them on laptops, water bottles, tablets, notebooks, phones, and more!

Coffee the Bear as an enamel pin! Coffee is one of Creampuffs best friends :)

1.25" Enamel Pin
Gold Plating
Rubber Backing

The Comet Club Bun is a collaborative plushie made by Bandage Brigade and artist Fuwaffy!

Very squishable, lovable, and ready to cling onto you!
Can be purchased as an add-on to a Comet Club clothing item or AS IS.

Features button clasps on the ends of it's arms and legs.
9.5" Tall

The Comet Club Shorts is a collaborative clothing piece made by Bandage Brigade and artist Fuwaffy!

Features:
- Includes a little plush bunny that clings onto your hip, removable with snap buttons.
- Large side and back pockets.
- Super soft, faux cashmere lining.

Shorts Measurements:

Model Info:
5'5" (165cm) wearing size medium.

*Sizes are US unisex fit, please allow 1-2 cm size variance
*Garment is measured on a flat surface, double the chest width for total circumference

Wash & Care

• Made of 85% 365GSM cotton | 15% polyester.
• Wash cold with like colors.
• Hang to dry.

The Comet Club Zip Up Hoodie is a collaborative clothing piece by Bandage Brigade and artist Fuwaffy!

Features:
- Includes a little bunny friend that clings onto your sleeve or hip, removable with snap buttons.
- Matching mini bunny ears on top of the hood, removable with snap buttons.
- Oversized 3 panel hood, designed to sit perfectly on or off your head.
- Puffy pockets with top/side openings and drawstrings.
- Super soft faux cashmere lining.

Sizing Suggestions:
If you are in between sizes, you can size up for a more oversized look!

Zip Up Jacket Measurements:

Model Info:
5'5" (165cm) wearing size medium.

*Sizes are US unisex fit, please allow 1-2 cm size variance

Wash & Care

• Made of 85% 365GSM cotton | 15% polyester.
• Wash cold with like colors.
• Hang to dry.

U.S. Men's shoe size 5.5-12
U.S. Women's shoe size 7.5-14

Made with 80% cotton, 17% nylon, 3% spandex material.
If socks are too large, wash then dry on high heat to shrink.

Size: 2.1 x 2.6"
Glossy Vinyl Waterproof UV Resistant Sticker 

You can place them on laptops, water bottles, tablets, notebooks, phones, and more!
*Watermark will not be on the final product

Get your favorite design as a magnet!

It's like a sticker that you can use again and again.
This acrylic magnet can be stuck on your fridge, whiteboard, metal locker, or anywhere else you can show off a magnetic piece of artwork!

Size: 2.3x2.3"
Made with 1/8 inch, laser cut durable acrylic and magnetic backing.
Arrives with a peel-able protective plastic film on the front.